From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
-
callyboy
Post
by callyboy » Thu Aug 18, 2011 8:54 pm
cable is stuck/seized foobar/knackard/broken/kaput/busted or maybe snapped. Anyone know how much a new one costs or do i need to trawl ebay for a cheapo one ?
Thanks awfully.
Pete
-
nokatanayet
Post
by nokatanayet » Thu Aug 18, 2011 8:56 pm
try wemoto pete
-
callyboy
Post
by callyboy » Thu Aug 18, 2011 9:06 pm
I was being lazy

They dont seem to have one listed
Pete
-
callyboy
Post
by callyboy » Fri Aug 19, 2011 6:19 am
Smart arse
Pete
-
Katfish
- Club Member
- Posts: 367
- Joined: Wed Nov 10, 2010 4:12 pm
- Location: York
- Has thanked: 29 times
- Been thanked: 29 times
Post
by Katfish » Fri Aug 19, 2011 6:53 am
Sorry Pete couldn't resist

-
Ash
Post
by Ash » Fri Aug 19, 2011 12:15 pm
When my throttle cable snapped, as I didn't have a clue as to what type it was as it is none standard, I just bought a new wire and nipples from:
http://www.venhill.co.uk/" onclick="window.open(this.href);return false; and just used the outer core of the old cable as a guide for length. As the bits were pretty cheap I bought enough to do another couple if it ever breaks again.
-
fossie
- Club Member
- Posts: 5182
- Joined: Sat Oct 23, 2010 9:16 pm
- Has thanked: 179 times
- Been thanked: 714 times
Post
by fossie » Sat Aug 20, 2011 9:56 am
Don't bother with it, it will only sieze again and usually in a slightly on position.
Just pull out slide with fingers .
Saves loads of hassle and fault diagnosis in a year or so!
-
johnr
- Club Member
- Posts: 3022
- Joined: Sun Oct 24, 2010 9:58 pm
- Location: lancashire
- Has thanked: 234 times
- Been thanked: 342 times
Post
by johnr » Sat Aug 20, 2011 10:00 am
oh, fossies back!! good hols foss?