550 swingingarm length

From a simple dustcap to a full on turbo-nitrous breathing monster.
If you have any questions, here's the place to ask.
Post Reply
User avatar
Nigelkat
Club Member
Posts: 422
Joined: Thu Jan 06, 2011 10:33 am
Location: Valladolid Spain
Has thanked: 1 time

550 swingingarm length

Post by Nigelkat » Mon Jun 20, 2011 6:11 pm

Hi as the title sayes can anyone measure the length of a 550 swingingarm
pivot centre to middle of rear wheel spindle slot for me please.
cheers
Nigel
Top
User avatar
Katman
Club Member
Posts: 1393
Joined: Wed Nov 10, 2010 10:03 am
Location: Sussex

Re: 550 swingingarm length

Post by Katman » Fri Jun 24, 2011 7:40 pm

Nige,
PM Pete (callyboy) as he's just stripped his 550 down to it's constitute parts
KOCUK 046 Jez
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________

GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued

My Gallery
Top
callyboy

Re: 550 swingingarm length

Post by callyboy » Fri Jun 24, 2011 7:55 pm

Jez/Nige,

more than happy to measure, but dont have a standard swingarm . Its a one of these :

Image

Pete
Top
callyboy

Re: 550 swingingarm length

Post by callyboy » Fri Jun 24, 2011 8:43 pm

run out of Solvol :(

Pete
Top
User avatar
Nigelkat
Club Member
Posts: 422
Joined: Thu Jan 06, 2011 10:33 am
Location: Valladolid Spain
Has thanked: 1 time

Re: 550 swingingarm length

Post by Nigelkat » Fri Jun 24, 2011 8:55 pm

very nice Pete how long is yours???? oh er, anyone got a standard one they can measure?
Top
callyboy

Re: 550 swingingarm length

Post by callyboy » Fri Jun 24, 2011 9:34 pm

Will measure mine tomoz - after i have rubbed it a bit more :)

Pete
Top
User avatar
Katman
Club Member
Posts: 1393
Joined: Wed Nov 10, 2010 10:03 am
Location: Sussex

Re: 550 swingingarm length

Post by Katman » Sat Jun 25, 2011 8:02 pm

callyboy wrote:Will measure mine tomoz - after i have rubbed it a bit more :)

Pete
Ooo eer missus
fnar fnar



That sounds like Finbar Saunders at his finest Pete ;) :lol:
KOCUK 046 Jez
I'm not a complete idiot...................... some parts are missing!!!!!!!!
_____________________________________________________________________

GSX750S3 ANATAK, GSX400SSN, GSX400 MK2 Impulse frame & an almost complete pile of 400 Kat parts to build a hybrid!! GS650G x 1 3/4...........
to be continued

My Gallery
Top
callyboy

Re: 550 swingingarm length

Post by callyboy » Sat Jun 25, 2011 8:06 pm

I thank you :)

Pete
Top
User avatar
Nigelkat
Club Member
Posts: 422
Joined: Thu Jan 06, 2011 10:33 am
Location: Valladolid Spain
Has thanked: 1 time

Re: 550 swingingarm length

Post by Nigelkat » Thu Jun 30, 2011 5:28 pm

anyone with a 550 and a tape??? go on you know you want to.
pleazzzze.
Top
callyboy

Re: 550 swingingarm length

Post by callyboy » Sat Jul 02, 2011 6:05 pm

Prob not much good coz mines not standard, but its 19 inches.


Pete
Top
Post Reply

Return to “Technical Q&A”