650 kat seat catch's

[callyboy]

Same as 550 ? if so these are the front:

http://www.katanaownersclub.co.uk/forum ... f=7&t=1172" onclick="window.open(this.href);return false;

Do you want a pic of the back locking thing as well ?

Pete

[callyboy]

[callyboy]

http://www.ebay.co.uk/itm/SUZUKI-KATANA ... _500wt_715" onclick="window.open(this.href);return false;

Is the 650 seat the same ? I presume so ? maybe wait for confirmation from someone else.

Pete

[callyboy]

Pete

[callyboy]

No worries, will measure tomoz.

Pete

[callyboy]

200mm long
60mm wide
hole is centred.

slots are 17mm from side and bottom edge and 5mm from top edge

slots are 37.5mm by.....(didnt measure !!!!- will go out and measure it later).

bar in the slot is 5mm wide and is 9mm from bottom edge and 23mm from top edge.

That ok ?

Pete

[Kryten]

200mm long
60mm wide
hole is centred.

slots are 17mm from side and bottom edge and 5mm from top edge

slots are 37.5mm by.....(didnt measure !!!!- will go out and measure it later).

bar in the slot is 5mm wide and is 9mm from bottom edge and 23mm from top edge.

That ok ?

Pete

Aha!

I sense a new measuring stick has been in use

[callyboy]

Spot on Jim tee hee

Pete

[bobster]

I may have a spare somewhere in my collection..............If I dont Fossie has, because I gave him 1 (seat catch that is ) last year at the AGM ............or was it the year before!

Dont time fly!

I will have a look!

[bobster]

Sorry i havnt had a chance to look yet m8.......................

But I bet if you joined the club......£11...........fossie could probably find you one!

Maybe even the one I gave him!