There’s a chance……

A place to kick back and talk about anything and everything.
Post Reply
User avatar
Kryten
Club Member
Posts: 1792
Joined: Sun Dec 26, 2010 11:13 pm
Location: North Norfolk
Has thanked: 118 times
Been thanked: 254 times

There’s a chance……

Post by Kryten » Fri Aug 12, 2022 10:15 pm

……. I could be in the “Naughty Corner” at EK10!


Was fitting the rack to the Kat when the thread on the upper suspension mounting gave up the ghost!
Prior to me getting the bike it had clearly been subjected to someone trying to fit M10 x 1.5 nuts to the mounting point.

Now trying to source a thread file to repair what’s left. There should be enough if I can get a hold of one.

If no joy then it’ll be the Speed Trip for me…
Jim

750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!

It was a New Day yesterday but, by God, it's an Old Day now!

User avatar
fossie
Club Member
Posts: 5179
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: There’s a chance……

Post by fossie » Sun Aug 14, 2022 9:10 am

Ventura is the answer , fit and forget , just add rack or rail....either way a man of talents ....
Remember if gaff a tape or cable tie can't fix it ...its scrap!😄
CLUB Chairman


My Gallery

User avatar
fossie
Club Member
Posts: 5179
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: There’s a chance……

Post by fossie » Sun Aug 14, 2022 2:25 pm

Blix wrote:
Sun Aug 14, 2022 2:15 pm
fossie wrote:
Sun Aug 14, 2022 9:10 am
Ventura is the answer , fit and forget , just add rack or rail....either way a man of talents ....
Remember if gaff a tape or cable tie can't fix it ...its scrap!😄
Except you can’t get the seat off :roll:
Yes you can.. Mine comes off dead easy ...lift it off the lock ,slide backwards and with a gentle tug it slides past the front locater .....that's not an engineers gentle probably though :D
CLUB Chairman


My Gallery

User avatar
Kryten
Club Member
Posts: 1792
Joined: Sun Dec 26, 2010 11:13 pm
Location: North Norfolk
Has thanked: 118 times
Been thanked: 254 times

Re: There’s a chance……

Post by Kryten » Sun Aug 14, 2022 3:42 pm

I do have a Ventura rack and bits. But I think Skruffy Kat's rear is slightly on the huh!* As when the thing is assembled the rack or the grab rail won't lift off.

I've borrowed a metric thread file off someone I've never met (the up side of social media!) So tomorrow I'll be spending a fair amount of time staring at the upper suspension mount before committing with the file 😱
16604913567058271303388136029746.jpg
Think there's enough thread to recover. Won't be pretty, but should be strong enough. A proper repair will need a visit to an engineering shop...


*Norfolk for not quite square
Jim

750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!

It was a New Day yesterday but, by God, it's an Old Day now!

User avatar
fossie
Club Member
Posts: 5179
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: There’s a chance……

Post by fossie » Sun Aug 14, 2022 7:24 pm

Or whack a slightly different threaded nut on and keeping turning ....the fix of fucket approach .
CLUB Chairman


My Gallery

User avatar
Kryten
Club Member
Posts: 1792
Joined: Sun Dec 26, 2010 11:13 pm
Location: North Norfolk
Has thanked: 118 times
Been thanked: 254 times

Re: There’s a chance……

Post by Kryten » Sun Aug 14, 2022 9:01 pm

fossie wrote:
Sun Aug 14, 2022 7:24 pm
Or whack a slightly different threaded nut on and keeping turning ....the fix of fucket approach .
That was the start of the problem I think!
Jim

750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!

It was a New Day yesterday but, by God, it's an Old Day now!

User avatar
fossie
Club Member
Posts: 5179
Joined: Sat Oct 23, 2010 9:16 pm
Has thanked: 179 times
Been thanked: 714 times

Re: There’s a chance……

Post by fossie » Sun Aug 14, 2022 11:12 pm

Didn't say it'd fix it .....😉
CLUB Chairman


My Gallery

User avatar
Kryten
Club Member
Posts: 1792
Joined: Sun Dec 26, 2010 11:13 pm
Location: North Norfolk
Has thanked: 118 times
Been thanked: 254 times

Re: There’s a chance……

Post by Kryten » Mon Aug 15, 2022 1:32 pm

Left it for a day. And using the borrowed thread restorer, got cleaned up and sorted!

Good to go now, but by God, it's hot and humid!
16605703197385124657712220397871.jpg
Jim

750 SZ (Not So) Skruffy Kat
1000 SZ in bits
7/11 SZ Long term
T509 Back on the road!

It was a New Day yesterday but, by God, it's an Old Day now!

Post Reply