Page 1 of 1
Mikuni BS32SS
Posted: Sat Nov 19, 2016 4:06 pm
by KatanaBob
Hi all,
Im looking for a gasket set for my 750 pop-ups carbs. They are Mikuni BS32SS
Does any know if the 1984 1100S has the same carbs? I found a gasket set for this model but cant find which model carb it actually is?!
Thanks in advance
Sent from my SM-G900F using Tapatalk
Re: Mikuni BS32SS
Posted: Sat Nov 19, 2016 5:07 pm
by katmarch
I think the 1100 are 34mm carbs not 32, try
http://www.wemoto.com
Steve
Re: Mikuni BS32SS
Posted: Sat Nov 19, 2016 6:51 pm
by KatanaBob
Thanks Steve! I am more wondering if the float bowl gasket and float needle/seat are the same. Wemoto have the individual sets but are a little pricy.
Sent from my SM-G900F using Tapatalk
Re: Mikuni BS32SS
Posted: Sat Nov 19, 2016 11:02 pm
by Kryten
BS32 and BS34 carbs will be basically the same with the difference in the bore and the slides and butterfly valves. The float bowl gaskets and the O rings and the float needle valves will be the same. NRP do the Keyster kits. I think if you are club member you may get a discount
Uncle_Bob was looking into identifying Nitron O rings for the 1100 carbs as he did for the 400.
Re: Mikuni BS32SS
Posted: Sun Nov 20, 2016 4:41 pm
by johnr
i think the bodies are basically the same, aside from the jets and the way the are machined. i think the gaskets diaphragms etc will be the same.
Re: Mikuni BS32SS
Posted: Sun Nov 20, 2016 7:50 pm
by KatanaBob
Great! Thanks guys!!
Sent from my SM-G900F using Tapatalk
Re: Mikuni BS32SS
Posted: Wed Nov 23, 2016 11:21 pm
by fossie
The carb gasket set is the same as GSX 750 ES/d/e/f/g.1983-89.
Re: Mikuni BS32SS
Posted: Fri Nov 25, 2016 6:52 am
by KatanaBob
Thanks!
Sent from my SM-G900F using Tapatalk