Page 1 of 1
GSX400SSN Air Screw Turns Advice
Posted: Fri May 01, 2015 8:58 pm
by Uncle Bob
What is a good setting to start with on the Air Screw thingies, after putting the carbs back together again on the 400. They were all different when I took them apart and have opted for 1 1/4 out but just checking.
Rob
Re: GSX400SSN Air Screw Turns Advice
Posted: Fri May 01, 2015 11:47 pm
by fossie
Manual says 1.5 turns out.
Re: GSX400SSN Air Screw Turns Advice
Posted: Sat May 02, 2015 8:28 pm
by jimmy400
That's what mine are at. With different needles (can't remember the size) Impulse 4 into 1 exhaust. But I'm sure the mixture screw stayed the same. I think it was Gazb who sent me the needles.
Re: GSX400SSN Air Screw Turns Advice
Posted: Mon May 04, 2015 8:23 am
by Uncle Bob
They are back on and I'll try 1.5... got some issues but at least it starts and runs.