Katana Owners Club U.K.

Hi guys can anyone point me towards M12 x 40mm hex flanged stainless bolts I need 4 thanks in advance

maybe:

http://www.ebay.co.uk/itm/50x-M12-X-40M ... _500wt_716" onclick="window.open(this.href);return false;

or I use these peeps:

http://myworld.ebay.co.uk/boltmeup&ssPa ... 1543.l2533" onclick="window.open(this.href);return false;

Pete

Pardon for a stupid question but is it a big problem to find a bolt in UK?:) In Russia and in Moscow there are plenty of special shops where you can find any bolt you need:)

Sergio wrote:Pardon for a stupid question but is it a big problem to find a bolt in UK?:) In Russia and in Moscow there are plenty of special shops where you can find any bolt you need:)

No its just this seems to be a bithard to source cos its flanged stainless and full thread and quite large!!

Pete did you look at the price of the first one £19 oh and its not stainless

mick will ring probolt after work thanks

Watcha Chris, thats for 50 of the buggers though !!!

Pete

callyboy wrote:Watcha Chris, thats for 50 of the buggers though !!!

Pete

Only need four!! Theyre for my front calipers I may have to get a normal hex bolt and washer and threadlock

Chrome would do equally well tho

If I were you I would not take stainless bolts for your calipers, neither on any other safety relevant parts. Proper steel is much better for that purpose. Not that you'll run into danger in short time, more likely a long term issue about contact corrosion between partner materials of quite different refinement etc.

I agree with Pedda, not only from the corrosion issue, but also from the tensile strength aspect.

ok can get steel what about coating? zinc?

chris, have you tried K supplies on vernon st they have all sorts and i'm sure you can buy as few or as many as you want. jimmy