No big deal.
Unbolt the 3 little bolts at the back of the clocks to have the shell pushed back.
Unbolt the 2 little bolts which hold the tach drive gear in place and remove it by pulling it up.
Unbolt the 2 little nuts which hold the mounting bracket in place and remove it.
Dig out the rubber thingy which holds the neutral bulb.
you can now easily change the bulb and put it all back together in place.
Be careful to have the wires lines up properly during reassembly.
Neutral Light in the dash Binnacle
-
Pedda
- Club Member
- Posts: 1516
- Joined: Mon Oct 25, 2010 11:21 am
- Location: Stadtlohn, Germany
- Has thanked: 53 times
- Been thanked: 198 times
Re: Neutral Light in the dash Binnacle
sassafras wrote:Pedda sorry for the spelling mistake-----Cheers
No problem, ssasaffrassarfs.
