Page 1 of 1
250 fork oil.
Posted: Wed Jan 16, 2019 1:13 am
by fossie
To save me firing up the old PC that is hidden in the spare room, then digging out the CD ....I thought I would just ask first.
Fork oil...how much per leg. .

Re: 250 fork oil.
Posted: Wed Jan 16, 2019 9:22 pm
by Uncle Bob
So my Japanese is wanting a little but it says:
Fork Oil 10 weight - 345cc per leg
Hold the front fork in a vertical position and adjust the fork oil using the special tool (yeah right! a piece of rod with some tape around it) to get a Oil Level air gap of 104mm (NOTE: When adjusting the oil level, remove the fork spring and compress the inner tube fully).
Hope that helps,
Rob
Re: 250 fork oil.
Posted: Wed Jan 16, 2019 9:49 pm
by fossie
Domo arigatou uncle bob san

quite a lot of oil really.. Which isn't so good as I may not have enough in stock

...but new stuff will added to your specs in the coming days . Ta!
Re: 250 fork oil.
Posted: Thu Jan 17, 2019 12:46 pm
by PaulD
fossie wrote:Domo arigatou uncle bob san

quite a lot of oil really.. Which isn't so good as I may not have enough in stock

...but new stuff will added to your specs in the coming days . Ta!
I might have some 10weight if yer stuck

Re: 250 fork oil.
Posted: Sat Jan 19, 2019 9:47 pm
by fossie
Cheers Paul , will see what we have .
Then maybe I'll pick it up off you next time I pass you snoozing on Regent Road industrial units

Re: 250 fork oil.
Posted: Sun Jan 20, 2019 11:41 am
by PaulD
fossie wrote:Cheers Paul , will see what we have .
Then maybe I'll pick it up off you next time I pass you snoozing on Regent Road industrial units

Busted
Let me know if you need it and I’ll ransack the workshop and find it

Re: 250 fork oil.
Posted: Sun Jan 20, 2019 5:21 pm
by fossie
So drain the 250 fork oil ....about 34.5 ml came out

Re: 250 fork oil.
Posted: Tue Jan 22, 2019 9:11 pm
by fossie
I have this very day acquired 1/2 litre of fork oil to add to my stock so we are good now cheers Paul.
