Page 1 of 2
Popup carb inlet rubbers
Posted: Sat Sep 18, 2021 6:31 pm
by tazland13
Hi don't know if anyone can point me in the right direction I'm looking new inlet rubbers as mine have detached from the metal
Thank you in advance
Re: Popup carb inlet rubbers
Posted: Sat Sep 18, 2021 10:34 pm
by fossie
A quick search for inlet rubbers GSX 750 esd revealed a few sets ...genuine Suzuki £224
However a few companies had left left and right ...( the 2 left are the same and the 2 right are the same ) 42 euros .
Re: Popup carb inlet rubbers
Posted: Sun Sep 19, 2021 10:53 am
by fred61
fossie wrote: ↑Sat Sep 18, 2021 10:34 pm
A quick search for inlet rubbers GSX 750 esd revealed a few sets ...genuine Suzuki £224
However a few companies had left left and right ...( the 2 left are the same and the 2 right are the same ) 42 euros .
The Genuine Suzuki ones don't come with the "o" ring seals so you will need to budget for them as well. Having just replaced mine the advantage of new rubbers means refitting the carbs is a doddle compared to fighting the old stiff ones.
Re: Popup carb inlet rubbers
Posted: Sun Sep 19, 2021 12:09 pm
by Lexdba
Agreed, carbs pop on within a minute!
Re: Popup carb inlet rubbers
Posted: Sun Sep 19, 2021 9:10 pm
by fossie
Re: Popup carb inlet rubbers
Posted: Mon Sep 20, 2021 2:03 pm
by PaulD
Lexdba wrote: ↑Sun Sep 19, 2021 12:09 pm
Agreed, carbs pop on within a minute!
Oh no they feckkin don’t
Re: Popup carb inlet rubbers
Posted: Mon Sep 20, 2021 6:52 pm
by Lexdba
PaulD wrote: ↑Mon Sep 20, 2021 2:03 pm
Lexdba wrote: ↑Sun Sep 19, 2021 12:09 pm
Agreed, carbs pop on within a minute!
Oh no they feckkin don’t
Oh yes they do
Re: Popup carb inlet rubbers
Posted: Fri Sep 24, 2021 3:35 pm
by Smallkat
Mmm... those carbs look nice. How were they done?
Re: Popup carb inlet rubbers
Posted: Fri Oct 01, 2021 4:12 am
by PaulD
Lexdba wrote: ↑Mon Sep 20, 2021 6:52 pm
PaulD wrote: ↑Mon Sep 20, 2021 2:03 pm
Lexdba wrote: ↑Sun Sep 19, 2021 12:09 pm
Agreed, carbs pop on within a minute!
Oh no they feckkin don’t
Oh yes they do
AC40317D-1B79-471E-89ED-87BD6FEB1E18.jpeg
Not on my bike with the air box and plenum chamber in place they don’t
Re: Popup carb inlet rubbers
Posted: Wed Jun 29, 2022 6:27 am
by Berti44
It’s an old subject to some but a pain in the ass job for me. My son and me have battled with getting the carbs into place with brute force and various forms of leverage but the end result was the same, no fit. Tried heating the inlets but still no joy. Anyway if at first you don’t succeed give up and retreat. Did that ….. so now something different. Because the carbs were separated I guess alignment is slightly different to the original condition when on the bike so I’ve fitted the inlets to the carbs to prove the effers fit and a sanity check. Also left them on now for several days so hopefully the inlets will remember their place in life. Next I’m going try fitting the carbs with inlet rubbers on the carb. Slide them into position as easy as that and bobs your uncle. If only …..
