Front Brake upgrade
Front Brake upgrade
Hi recently I had my shoulder completely replaced, unfortunately the op caused some nerve damage in my arm. Result is that my right hand is weaker and operating the front brake feels less than comfortable when hurtling into the corners. Add to that 1985 brakes and I started to wonder if anybody has looked at upgrading the front callipers and getting some newer ones that fit directly into existing holes in forks. Would prefer to keep original size discs just to make whole thing easier. But if some one has done this and would kindly send list of all parts and where to get any special bits, then I would happily go down that route. I have two 1985 pop up Katanas which I love riding and enough bits go allow me to be in the process of making a a Katana pop up cafe racer with a modified frame, souped up engine, upgraded front and rear suspension. For the more extreme days out on the bike.
-
- Club Member
- Posts: 928
- Joined: Mon Nov 16, 2020 10:40 pm
- Has thanked: 25 times
- Been thanked: 99 times
Re: Front Brake upgrade
You could try an adjustable ratio master cylinder. AP Lockheed or HEL if you want something a bit modern looking.
GSX250SS Tinykat (gone, but the hole in my wallet not forgotten)
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
VFR750FT
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
VFR750FT
-
- Club Member
- Posts: 34
- Joined: Wed Sep 16, 2015 1:30 pm
- Has thanked: 8 times
- Been thanked: 3 times
Re: Front Brake upgrade
This bike on ebay has upgraded brakes:
https://www.ebay.co.uk/itm/164822236976?ul_noapp=true
Does anyone recognise where the front calipers come from? I spoke to the seller and he said he didn't fit them, but they fit directly to the standard forks with just spacers added.
https://www.ebay.co.uk/itm/164822236976?ul_noapp=true
Does anyone recognise where the front calipers come from? I spoke to the seller and he said he didn't fit them, but they fit directly to the standard forks with just spacers added.
-
- Club Member
- Posts: 928
- Joined: Mon Nov 16, 2020 10:40 pm
- Has thanked: 25 times
- Been thanked: 99 times
Re: Front Brake upgrade
If you measure the mounting hole centres and ring a breaker with that info, I am sure they could tell you what they have that might work.
GSX250SS Tinykat (gone, but the hole in my wallet not forgotten)
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
VFR750FT
GSX400SS Smallkat
GT250 X7
GT200 X5
BMW R1250R
VFR750FT
- Lexdba
- Club Member
- Posts: 246
- Joined: Mon May 11, 2020 7:25 am
- Location: Tulip country
- Has thanked: 44 times
- Been thanked: 77 times
Re: Front Brake upgrade
I tried all that and Honda VFR Nissins came the closest but no cigar.
PreTech made callipers that fit the GS wheels/discs but are no longer in business.
PreTech made callipers that fit the GS wheels/discs but are no longer in business.
It's faster to break than to repair.
-
- Club Member
- Posts: 34
- Joined: Wed Sep 16, 2015 1:30 pm
- Has thanked: 8 times
- Been thanked: 3 times
Re: Front Brake upgrade
After some online research it looks like the calipers are late 90s Bandit 1200 or GSXR1100, but the bolt hole spacing on the forks are 90mm. Mine are 70mm, so it looks like the upper fork mount has been cut and re-welded.
- SamK
- Site Admin
- Posts: 266
- Joined: Sun Oct 26, 2014 9:30 am
- Has thanked: 11 times
- Been thanked: 64 times
Re: Front Brake upgrade
You could start with some braided hoses while you’re searching for calipers.
I have them on mine and they made a noticeable difference.... brakes are still shit compared to the new bike though
I have them on mine and they made a noticeable difference.... brakes are still shit compared to the new bike though